NT2640 Midterm (ITT Tech)

BUY HERE: NT2640 Midterm Review (ITT Tech) – Homeworkmade

NT2640 Midterm (ITT Tech)

1. What are the two protocols used at the OSI Transport Layer?
2. Identify the layer for the following protocols
3. The process of adding different headers and trailer is known as
4. What is the function of the autonomous system (AS)?
5. What is the function of ARP and RARP?
6. What is the well-known port for DNS, FTP, and SMTP?
7. The port number is a feature of a connectionless protocol like UDP
8. Devices connected to an Ethernet hub is described as a _______ domain
9. What is the interface type for a TDM circuit (DS1/T1) at the demark
10. The exterior protocol used for external gateway protocol only is
11. The destination IP address is used to make the routing decision on an IP packet
12. Define the function of the broadcast address
13. Answer which statements are true of Classful IP addressing concepts
14. A _______ line is a Point-to-Point WAN connection provided over a Telco
15. Explain what the following commands are used for on a Cisco Router
16. List the Private address as defined in RFC1918
17. Define each of the following network commands
18. List the Administrative Distance for the following Protocols
19. In order for two hosts that are assigned to two different IP subnets, it requires an IP router to communicate with each other
20. ________ is the underlying protocol used by the ping command
21. __________________ are two layer 2 protocols commonly used in WANS
22. Fill in the Chart below
23. Explain a collision domain
24. List the four dynamic routing protocols discussed in class. Identify it as a distance Vector or Link State protocol and whether it is an exterior gateway protocol (EGP) or an interior gateway protocol (IGP)
25. What two metrics are used by default in EIGRP metric calculation
26. If a Microsoft Windows system can ping by IP address, but not by hostname there is a problem with the ___ settings. You can use the local _____ file to help troubleshoot